RFID Lock, 2 lock system with Power Jack cable, 3 usercards and 1 wristband

Description

KR-S80L-LC-PJC lock system has 2 locks connected together that operate at the same time when either lock is scanned.
Your 2 lock system will come with a power pack cable.
This power jack cable would also supply dc power to both locks incase the batteries go dead.
You would need an external power supply (sold separately Part # PS-002-3.5mm) to power the locks. This 2 lock system will come with an inter connect cable kit that consists of a Y cable and 19.5 inch extension cable all designed to daisy chain the 3.5 mm to 3.5 mm connectors.
Each system also comes with 1 manager card, 3 user cards and 1 wristband.  When using the power jack cable with an eternal power supply.  All locks will have power but they will not all open at the same time.  Open up 1 by 1 and change batteries.  Once new batteries are in, and the external power supply unplugged, they will all open at the same time again.
We can make lock systems up to 10 locks to operate at the same time, please email us with your requirements and we can design a system for you!
Lock Connection is a certified retailer of locks for several manufacturers. We deal with locks and are lock experts!
youtube video:
https://youtu.be/30ddd-PRg_k
High quality RFID cabinet lock system!. Easy to install. Keep your valuables / accessible safe!
These systems are completely programmed before they leave our warehouse!
Just add batteries.
This RFID lock can be easily mounted inside of furniture drawers or cabinet doors unseen to the eye. Perfect for hidden compartments or shop displays and unlocked with the included user card. RFID cards easily access the sensor through up to 1.5" of hardwood or glass. 4 AAA power the unit with a working battery life of up to 50,000 cycles. If battery life starts to get low, a low voltage alarm will sound to indicate a battery change is necessary. Total battery drainage will result in the lock being unable to lock ensuring you will never have a locked out situation. Each lock features spring releases that will give the drawer, cabinet etc. a push to open itself. Easy to follow setup instructions included will guide you to use the programming manager key to activate your user cards. All stress points are reinforced with steel. No PC necessary to activate user cards!
The Management, user cards and wristband come programmed to the locks already!
includes (3) RFID user cards,1 manager card and 1 wristband per system(both locks will open when either are scanned.)
Lock Body dimensions(LxWxH): 80x80x27mm;
Strike dimensions(LxWxH): 80x21.5x27mm
Ideal for cabinet drawers, shop displays, gym lockers.
User manual included.
each lock uses 4 AAA batteries (Not Included, Alkaline or Lithium required)
Model KR-S80L-LC-PJC
One lock accepts up to 50 user keys.
One user key can be set-up for multiple locks.
Part # -- KR-S80L-LC-PJC
1. Unlocking automatically after swiping card.
2. Low voltage alarm:
when voltage is lower than 4.5V, lock will p
rompt with sound and light every opening.  If batteries die completely, lt           will fail open and stay unlocked.
3.
High frequency card: Mi-fare 1, 13.56MHz.
4.
Anti-force strength: 250kgs.
5.
Longer s
ensing distance: maximum 40mm (1.57")
6.
Support various materials: wooden, plastic, etc.
7.
Invisible style: can be installed inside of the door, which can’t be seen from the outside.
8. There is long time unlocking alarm function. Press button 1 and button 2 simultaneously to enable/disable that function.
2. Mode specification
Setting mode: Press button 3
2
.1. Temporary public mode:
after sound “
di
”, the lock bolt retracts.
2.1.1 It keeps unlock before read any temporary card.
2.1.2 Users can swipe any card to lock, and use the same card to open.
2.1.3 Manage card can close/open the lock and can open the lock that closed by any card.
2.2. Fixed private mode:
after sound “
di di
”, lock bolt sticks out, lock closed.
2.2.1 User need set user card by manage card then to open the lock, manage card only use for setting user card and cannot open the lock in this mode.
2.2.2 Read user card →motor rotate, lock open →after 3s, lock bolt sticks out, lock closed.
2.2.3 If the hook is not connected to the lock in 30s
（
open door till 30s
）
, a sound alarm will appear and the alarm will be up to 10s.This is the hook alarm, and user can cancel/set this function by press button “1+2” the same time.
2
.3 Fixed public mode:
after sound “
di, di, di
”, the lock bolt stick out.
2.3.1 It keeps closed before reading cards.
2.3.2 After change to fixed public mode, need to set fixed card (user card) through manage card.
2.3.3After set fixed card, swiping card to open lock, the lock bolt will keep retracted.
2.3.4 Swiping the fixed card to close the lock.
2.4 Random public mode:
2.4.1 Before setting mode (initialize mode), user can use any card to close the lock, and need use the same card to open the lock.
2.4.2 After setting mode and setting manage card, change to temporary public mode.
3 . Introduction of Function Button
3.1 Button 1: Set manage card
3.1.1 Press button 1 for 2s, the lock issue a short “di”, then enter into card configuration, swiping one card to be manage card.
After long sound “di”, the green light will flash, it means setting the
card
successfully.
After two short sound “di, di”, the red light will flash, it means setting the card unsuccessfully.
3.1.2 Can only set one card to be managing card.
3.1.3 The manage card can only be used to set card and cannot be used to open the lock (Only temporary public mode can open the lock).
3.1.4
Remark: Set user card (only Fixed private mode & Fixed public mode
)
Swiping manage card, the lock issue “di”
，
then enter into card configuration,
the green light will flash, then swiping one card to be user card.
After sound “di”, it means setting the user card successfully.
Can set user card continuously as long as the green light flash.
Each lock can accept 50pcs card at most.
3.2 Button 2: Set delete card
3.2.1 Press button 2 for 2s, the lock issue a short “di” and enter into setting card, swiping one card to be delete card.
3.2.2 Delete card can delete all users cards at one-time but cannot delete the manage card.
3.2.3 Delete card cannot be used to open the lock.
3.3 Button 3: Change mode
3.3.1 Factory mode: Random public mode.
3.3.2 Press button 3, the lock issue a short “di” and enter into temporary public mode.
3.3.3 Press button 3, the lock issue short “di, di” and enter into fixed private mode.
3.3.4 Press button 3, the lock issue short “di, di, di” and enter into fixed public mode.
3.4 Button 4: Set single/double card mode
3.4.1 Press button 4, the lock issue a short “di” and enter into single card mode. Under this mode, can only set user card.
3.4.2 Press button 4, the lock issue short “di, di” and enter into double card mode. Under this mode, can set user card + staff card at the same time.
Notes:
A. After change mode, user cards and staff cards will be invalid. But manage card and delete card are still valid.
B. Press button “Reset”, the lock issue short “di, di, di” and will be initialized. All cards will be invalid and lock system will be back to random public mode.
4. Sound Prompt Function
4.1 Card read prompt
According to different functions or states, the lock will issue sound as: “di”, “di, di”, “di, di, di” or a long “di”.
4.2 Unlock/Lock
After read the card successfully, the motor will rotating back and forth, the lock will issue sound “di”
4.3 Warning
4.3.1 Can set warning tone if the door keeps open for long time .(User can require the time setting when manufacture).For example , if the door is not closed for more than 30 seconds, the buzzer will issue an on-going long “di” to remind user to close the door well (This function can be only used in private mode.)
4.3.2 User can press button 1 and button 2 at the same time to choose whether need warning function or not.
5. Security Function
5.1 Locking of illegal card
If read the lock with illegal card for 5 times, the system will be locked till 5s and only use manage card to awaken.
In locking condition, if read any card (except manage card), it will issue "di di di di di" as the alarm sound.
5.2 Low voltage alarm
5.2.1: 4.5V±0.1V: Once reading card, the lock will issue “di di di” as the alarm sound, which is low power alarm.
5.2.2: 4.0V±0.1V: After unlock the last time, the motor stops working. The lock is open and cannot be closed any more. User need to change the batteries to make the lock work again.
5.3 Power saving
If there is not any operation in 3s, lock system will enter into sleeping mode.
RETURN POLICY
Returns are free on any item that you receive that is defective or an incorrect item was received.  Returning an item for any other reason is still accepted assuming items are in the same new condition.  However, the buyer will be responsible for the return shipping cost.
Size
L80*W80*27MM
Material of lock body
ABS
Certification
CE;FCC
;
RoHS ;IAF
Usage
Storage locker; cabinet; deposit locker; file locker.
Driven mode
Motor/Servo
Battery
6V(4*1.5V AAA batteries)
Warning voltage
4.5V
Static power consumption
less than 500mA
Dynamic power consumption
200 mA
Unlock way
RFID
Reaction time
Less than 500ms
Working temperature
-15
℃
~ +75
℃
Working humidity
5% ~ 95%RH
Working life
500000 times
Returns are free on any item that you receive that is defective or an incorrect item was received.  Returning an item for any other reason is still accepted assuming items are in the same new condition.  However, the buyer will be responsible for the return shipping cost.
For any returned products, up to a 25% restocking fee can be added based on the condition of the returned product.
<
Why Lock Connection?  Simple, we are lock and hardware experts.  We can be contacted via phone or email.  We offer support on all products.  We ship within 24 hours and typically less than 12 hours.  We aren't satisfied unless you are satisfied!.  Check us out and see the difference