Seco-Larm SD-9263-KSQ ENFORCER "No Touch" Request-To-Exit Sensor (Single Gang)

Description

Seco-Larm SD-9263-KSQ ENFORCER "No Touch" Request-To-Exit Sensor Plate w/Adjustable Delay Timer
(Single Gang)
Introduction
The Enforcer Outdoor No Touch Request-to-exit Sensor Is A Full-featured Exit Plate Which Uses Ir Technology To Allow Egress From A Protected Area Or Activate A Device With The Simple Wave Of A Hand. Since It Is No Touch, This Sensor Is Ideal For Use In Hospitals, Clinics, Labs, Cleanrooms (To Reduce The Risk Of Contamination), Schools, Factories, Or Offices.
Features
•
No-Touch – Just Wave A Hand In Front Of The Sensor
•
Reliable Motion-Sensing IR Technology
•
Sensing Range: 2"~7" (5~18cm)
•
Reaction Time: 10mS
•
Weather-Resistant (IP65) For Outdoor Use (Can Be Used For Indoor Too)
•
Clean And Simple No-touch Operation Reduces The Risk Of Cross-Contamination
•
Adjustable Sensor Range Up To 7" (18cm)
•
Durable, Stainless Steel, Single-Gang Faceplate
•
Relay Type: Form C Dry Contact
•
SPDT Relay Output, 1.2A@24VDC
•
Built-In Timer, Adjustable 0.5~30 Second
•
12/24 VDC Operation
•
Current Draw: 25mA@12VDC, 32mA@24VDC
•
1a Relay, Adjustable Trigger Duration 0.8~30 Seconds Or Toggle
•
LED Illuminated Sensor Area For Easy Identification
•
Selectable LED Colors (Turns From Red To Green Or Green To Red) To Show If The Sensor Is Activated
•
Operating Temperature: -4°~131° F (-20°~55° C)
•
Dimensions: 23/4" x 41/2" x 15/16" (70 x 115 x 33.5 mm)
•
Weight: 108g